How to Adjust Closing Speed « How to « Touch ‘n Hold .: Greenstar Door Closers

How to

How to Adjust Closing Speed

Adjusting the closing speed is as simple as tightening or loosening the screw knob on then.

 

Operation and adjusting instructions:

  • To hold the door open: Just press the Touch’n Hold button.
  • To close: Push the door open slightly and release. (do NOT touch button)

Closing speed may be adjusted from the thumbscrewTo adjust closing speed:

  • The door closers are adjusted at the factory for the comfort zone, to close the door in 4-5 seconds.
  • Closing speed may be adjusted from the thumbscrew shown in Fig. 7.
    Caution: Do not use a power tool to install or adjust the screw.
    It is recommended to adjust closers individually (with the other closer disconnected)